Add a new macOS cocoa screen, cocoa-screen-metal.m.
Rewrite the macOS cocoa drawing code to use the builtin runloop,
and use Metal to push pixels with CAMetalLayer.
Remove all of the deprecated code, and simplify some of the logic.
Modify mkwsysrules.sh such that the new code is used only when
the system version is equal or higher than 10.14.
Allow touch events to simulate mouse clicks:
three finger tap for the middle mouse button;
four finger tap for the 2-1 chord.
Support Tresize.
Scale 16x16 Cursor up to 32x32 with an EPX algorithm.
Support macOS input sources including the basic dead keys and the
advanced CJK input methods.
Increase the communication buffers in cocoa-srv.c to allow more
input, especially for long sentences prepared by the macOS input
souces.
Both `upas/nfs` and `upas/smtp` call the currently broken `tlsClient()`
from libsec. This commit copies a fix from upas/nfs into upas/smtp.
In `imapdial()`, upas/nfs replaces a process call for tlsClient with
`stunnel3` when not on Plan 9. upas/smtp calls tlsClient directly
as a function, so imapdial was copied into mxdial.c as `smtpdial()`,
and tlsClient+dial replaced with a call to smtpdial.
This makes fontsrv use the PostScript font names on X11.
The PostScript font names contains only alphanumeric and
hyphens. This allows us to use the Font command in acme.
It also matches the font names used by fontsrv on macOS,
which has been using PostScript font names.
macOS Mojave version 10.14 starts to disable font smoothing.
We disable font smoothing for OSX_VERSION >= 101400 to match the
system default font rendering.
It also makes the font rendering on macOS similar to that on X11.
Opening /dev/ptyXX files fails on recent
FreeBSD versions.
Following the same fix being applied to
Linux, OpenBSD, and Darwin, we use openpty
to open a pseudoterminal in openpts.
* Avoid allocating empty images by adding 1 to width/height. This was
crashing fontsrv. The total width of the subfont image can be zero
even if the characters are present in the font. For example, all the
characters in x0300.bit (part of "Combining Diacritical Marks" Unicode
block) have zero width.
* Make sure U+0000 is always present in the font, otherwise libdraw
complains with: "stringwidth: bad character set for rune 0x0000 in ..."
* Use the same fallback glyph (pjw face) as OS X. This also fixes a bug
where advance was set to the total width of subfont instead of the
character.
Update #125 (most likely fixes the crash if in X11)
Change-Id: Icdc2b641b8b0c08644569006e91cf613b4d5477f
According to RFC 3501 the arguments to the LOGIN command should be
quoted strings (or length prefixed string literals). Without quoting,
authentication to some IMAP servers (e.g. Dovecot) will fail.
When plumbing an address like `3-`, Acme selects line 1,
and similarly `3+` selects line 5.
The same problem can be observed for character addresses (`#123+`)
but _not_ for ones like `+`, `.+` or `/foo/+`:
The problem only occurs when a number is followed by a direction (`-`/`+`).
Following along with the example `3-` through `address` (in addr.c):
We read `3` into `c` and match the `case` on line 239.
The `while` loop on line 242ff reads additional digits into `c`
and puts the first non-digit back by decrementing the index `q`.
Then we find the range for line 3 on line 251 and continue.
On the next iteration, we set `prevc` to the last `c`,
but since that part read ahead _into `c`_,
`c` is currently the _next_ character we will read, `-`,
and now `prevc` is too.
Then in the case block (line 210) the condition on line 211 holds
and Acme believes that it has read two `-` in sequence
and modifies the range to account for the “first” `-`.
The “second” `-` gets applied after the loop is done, on line 292.
So the general problem is:
While reading numbers, Acme reads the next character after the number into `c`.
It decrements the counter to ensure it will read it again on the next iteration,
but it still uses it to update `prevc`.
This change solves the problem by reading digits into `nc` instead.
This variable is used to similar effect in the block for directions (line 212)
and fills the role of “local `c` that we can safely use to read ahead” nicely.
For some fonts, using box-drawing characters in the representative
text for computing the line height results in it being uncomfortably
high. Replace them with accented capitals and tall lower-case letters
which lead to a more conservative increase in the line height.
Fixes#162.
Double the width returned by CTFontGetBoundingBox when drawing.
Add box drawing characters for determining the line height.
Call freememimage(1) for the character memimage.
Fixes#18.
Fixes#120.
Fixes#146.
TERM_PROGRAM is the customary way to identify which kind of terminal
emulator program one uses on macOS.
This change sets TERM_PROGRAM to termprog since both variables are used
for the same purpose.
rc on amd64 stores ulimit values as 32-bit int, but the limits on
OpenBSD amd64 can exceed 2^31, so "ulimit -a" shows some values as
negative. This is a problem when I want to increase my ulimit but
the hard ulimit values are printed as negative.
Before, executing Get in a file rewound the window offset and
selection to the start of the file.
After this CL, Get preserves the window offset and selection,
where preserve is defined as "the same line number and rune
offset within the line". So if the window started at line 10
before and the selection was line 13 chars 5-7, then that
will still be true after Get, provided the new content is large
enough.
This should help the common situation of plumbing a
compiler error, realizing the window is out of date,
clicking Get, and then losing the positioning from the
plumb operation.
Since macOS 10.13, opening the /dev/ptyXX files
always return ENOENT.
Consequently, we changed getpts to use openpty to
open a pseudoterminal, like on Linux and OpenBSD.
Fixes#90.
Fixes#110.
decode.c:146:8: warning: variable ‘argv’ set but not used
fs.c:953:47: warning: variable ‘reset’ set but not used
imap.c:348:6: warning: variable ‘prefix’ set but not used
Updates #114.
Bad remote file systems can change mtime unexpectedly,
and then there is the problem that git rebase and similar
operations like to change the files and then change them back,
modifying the mtimes but not the content.
Avoid spurious Put errors on both of those by checking file
content.
(False positive "modified since last read" make the real ones
difficult to notice.)
After making the build on macOS silent on commit 310ae03,
the build was broken on macOS lesser than 10.12 (Sierra).
This commit conditionally checks the version the of the
SDK before using the defined values for silent build.
Fixes#66.
Rename following .cvsignore files to .gitkeep since they are
required by the build (directories must exist before build):
- bin/fossil/.gitkeep
- bin/fs/.gitkeep
- bin/venti/.gitkeep
Change-Id: I9c2865058480cffb3a4613f25e2eca1f7e5578c0
